Urinal flushers are often in male washroom. They can easily use it in the standing position and don’t need to manual flushing it flush by automatic flushing. Urinals designed to maintain toilet hygiene and save water.

Time is changing & start moving on manual flushing to automatic flushing system to soon or reuses to flush at all. The automatic urinal flusher sensor are very simple, hygienic and useful for everyone.

If you want to change your manual flushing to automatic then it's quite simple you just need to remove you MANUAL from your washroom and need to install a FLUSHBUOY in washroom.

The sensor is attached and controls the solenoid-activated diaphragm valve located inside the faucet fixture. The solenoid pushes or pulls as an electromagnet, depending on the electric polarity. A rubber disc controls the water flow in a diaphragm valve.

The diaphragm valve is typically held shut until the sensor signals that hands or other large objects have been detected. The solenoid then pulls the valve open to allow water to flow from the spout. When the objects or hands are no longer detected in front of the sensor, the valve is then pushed down and closed.

Some Sensor faucet models can provide hot or cold water, depending on how the fixture is set. However, most touchless faucets simply spout warm water unless otherwise directed.

Yes, Sensor Tap / Sensor Faucet save water, the follow rate of the Sensor Taps is too low as compare to traditional taps. A Sensor Tap generally use a special kind of aerator which is only eligible for sensor based product it will reduce the follow of water and means that much less is needed for washing than is the case with traditional taps.